PRODUCT CENTER
从产品分类逐步缩小范围，查找适合您应用的产品系列与技术资料。
PRODUCT CATEGORIES
按连接形式浏览流体连接产品。
浏览子分类 →浏览流体输送管路及软管总成。
浏览子分类 →
按驱动方式浏览直线与旋转执行元件。
浏览子分类 →
浏览液压马达、电机、驱动器及运动控制。
浏览子分类 →
按控制功能和应用浏览阀产品。
浏览子分类 →按工作原理浏览液压泵及相关产品。
浏览子分类 →
浏览储能、调压及精密流体控制产品。
浏览子分类 →
按工作介质和过滤用途选择产品。
浏览子分类 →
按密封形式浏览密封件及工程材料。
浏览子分类 →浏览冷却、导热及电磁屏蔽产品。
浏览子分类 →
浏览飞行控制、燃油、液压及制动系统。
浏览子分类 →浏览真空发生、吸附和搬运产品。
浏览产品系列 →PRODUCT SERIES
查看系列能力、可选型号和技术资料。
Parker’s SprayCool® multiple platform enclosure (MPE) series of enclosures utilize the efficiency of evaporative (two phase) cooling using a patented direct spray technology and a di-electric fluid.
One ATR format system for multiple high-power VPX modules each in excess of 150 watts. Up to four kW of cooling is possible utilizing the single loop fluid system and the Parker-patented macrolaminate construction of the enclosure cold plate side walls.
过滤器歧管集成了支持系统压力、系统回流、液压泵壳体和/或系统充注管路所需的过滤器，具备重要的系统健康监测功能和方便的维护通道。
The air separation module (ASM) inlet filter is responsible for removing contaminants and water content from the bleed air stream prior to reaching the ASM.
Chip collectors remove ferrous particles from engine oil to increase the life of oil and optimal performance of the turbine engine.
Air-oil separators, by Parker Aerospace, are custom designed to fit application requirements. Unique, proprietary software provides analysis to develop sizing for the flows and air-to-oil ratios in the application.
LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
LORD® 606/6GB adhesive system creates strong bonds with excellent surface cure & minimal surface preparation. Fast-setting system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for precise control of bondline thickness.
LORD® 661/6GB acrylic adhesive system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for control of bondline thickness. It creates exceptionally strong bonds with excellent surface cure and minimal surface preparation.
LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals.
LORD® 810S/20GB flexible acrylic adhesive system bonds ACM, various metals, and engineered plastics, and contains glass beads for precise control of bondline thickness. It delivers fast cure speed and strong bonding with minimal bondline read-through.
从工况出发，找到合适的产品