Thermoset 311 epoxy encapsulant is a two-component, filled epoxy system designed for electrical & electronic applications requiring high operating temperatures and applications where high thermal shock is expected. It provides a semi-rigid epoxy system.

动态粘度：29500 cP @ 77°F (25°C) (resin), 15000 cP @ 77°F (25°C) (hardener), 20000 cP @ 77°F (25°C) (mixed) Hardness：77 Shore D Cure Time：16 to 24 Hours @ 167°F (75°C), 6 to 8 Hours @ 203°F (95°C), 2 to 3 Hours @ 248°F (120°C)

密封技术电子灌封和封装

Thermoset DC-812 Epoxy Encapsulant

Thermoset DC-812 epoxy encapsulant is a two-component system designed specifically for potting high voltage, automotive ignition coils.

动态粘度：60000 cP @ 77°F (25°C) (resin), 100 cP @ 77°F (25°C) (hardener) Hardness：90 Shore D Cure Time：12 to 16 Hours @ 176 to 194°F (80 to 90°C), 4 Hours (total) = 2 hours @ 194 to 203°F (90 to 95°C), followed by 2 hours @ 239 to 257°F (115 to 125°C), 8 Hours (total) = 4 hours @ 176 to 185°F (80 to 85°C), followed by 2 hours @ 239 to 257°F (115 to 125°C), followed by 2 hours @ 293 to 311°F (145 to 155°C)

流体连接超高压软管接头

M型过渡接头

此类过渡接头用于连接"M"型带旋转螺母的接头，且用58°锥密封。

连接 1 类型：Male, Torpedo, Torpedo with Gland Nut and Collar, UNF Thread 形状：Straight 连接 2 类型：Male, Type "M", High Pressure, Male, Medium Pressure, Male, BSP, Torpedo, Torpedo with Gland Nut and Collar, UNF Thread, NPS Thread

流体连接C&T锥螺纹接头

MP系列中压过渡接头

中压过渡接头采用了58°/60°锥和带左旋螺纹钢管设计，工作压力可达到20,000 psi.

连接 1 类型：Female, Male, Medium Pressure, Female, High Pressure, UNF Thread, NPSM Thread 连接 2 类型：Male, Male, Medium Pressure, High Pressure, Male, BSP, Female, Female, UNF Thread, NPSM Thread, UNF Thread 连接 1 尺寸：7/16"-20 inch, 9/16"-18 inch, 13/16"-16 inch, 3/4"-14 inch, 1-3/8"-12 inch, 3/4"-16 inch, 1-1/8"-12 inch

流体连接超高压软管接头

HP系列高压过渡接头

不锈钢过渡接头采用了58°/60°锥和带左旋螺纹钢管设计，工作压力可达到60,000 psi.

连接 1 类型：Female, Male, High Pressure, Low Angle Face Seal, UNF Thread 连接 2 类型：Male, Female, High Pressure, Male Thread, BSP Thread, UNF Thread 连接 1 尺寸：9/16"-18 inch, 3/4"-16 inch, 1-1/8"-12 inch

流体连接C&T锥螺纹接头

高压堵帽

高压堵帽和Polyflex高压接头一起使用

产品类型：JIC， Type,“M"中压，高压，NPT, Medium Pressure Fittings, High Pressure Fittings, NPT 管道外径：6 - 23 mm 应用：油田，海洋, Marine

流体连接C&T锥螺纹接头

高压堵头

高压堵头和Polyflex高压接头一起使用

总长：Varies 形状：Straight 应用：油田，海洋, Marine

流体连接超高压软管接头

高压项圈

高压内外螺套和Polyflex高压接头一起使用

连接尺寸：1/4"-28 inch Thread, UNF-LH, 3/8"-24 inch Thread, 9/16"-18 inch Thread, 3/4"-16 inch Thread, 1"-14 inch Thread 形状：Straight 应用：油田，海洋, Marine

流体连接C&T锥螺纹接头

高压芯杆

高压螺纹接头和Polyflex高压接头一起使用

管道外径：1/4, 3/8, 9/16, 3/4, 1 inch 形状：Straight 应用：油田，海洋, Marine

流体连接C&T锥螺纹接头

高压锁紧螺母

高压压紧螺母和Polyflex一起使用

连接尺寸：7/16"-20 inch Thread, UNF, 9/16"-18 inch Thread, 13/16"-16 inch Thread, 3/4"-14 inch Thread, NPS inch Thread, 1-3/8"-12 inch Thread, 3/4"-16 inch Thread, 1-1/8"-12 inch Thread 形状：直的应用：油田，海工, Marine

流体连接C&T锥螺纹接头

锥螺纹外螺纹转换接头和内螺纹转换接头

派克Autoclave的锥螺纹（锥度与螺纹形式）的转换接头和直通接头是设计用于与派克Autoclave中高压钢管连接使用的。

配件类型：锥螺纹 连接 1 尺寸：1/8", 3/8", 1/2", 1/4", 9/16", 3/4" inch 连接 2 尺寸：1/4", 3/8" inch

流体连接液压37°扩口过渡接头

Triple-Lok® 2 JIC系列37°扩口弹性密封硬管及过渡接头

LT Temptrace™集成管束为单根或多根处理管开发设计，一层隔热层将降低热量损失，并且其防火外层为该产品提供额外保护。该产品是适合于简单仪器管路冷冻防护和粘度维持的理想产品。

最大运行压力：62 (Dynamic Pressure) MPa, 621 (Dynamic Pressure) bar, 9000 (Dynamic Pressure) psi 形状：90°, Staight, and Tee 连接类型：Flare

从工况出发，找到合适的产品

让应用工程经验帮助您完成选型

联系技术支持 ›